2014_Events_Sdms Seal Co.,Ltd. Offcial website,In Mechanical Seal Business Since 1976

Product Search

Industrial
Pump Company
Pump No.
Pump type
Product Series
Keys

Service Guide

Chinese

English

Products & Soluctions

Events

2015 |2014 |2013 |2012 |..Before

Mechanical seals new materials and technologies

2014-06-05

With the rapid development of polymer organic synthesis industry, the emergence of liquid sealant, used for static sealing; this new technology, often called the liquid seal. Liquid seal principle, is the use of liquid sealant adhesion, mobility and single molecule membrane effects (the thinner the film the greater the tendency of natural reply), at the appropriate pressure, it works the same way as the washer. Therefore, the use of a sealant, also called liquid gasket.

The reaction kettle with mechanical seal structure and working principle

2014-05-08

Reaction kettle static ring and the relative rotation between the ring seal, belongs to the dynamic seal, rely on the spring loading device and medium pressure in relative rotation.Static contact area between ring and ring (face) to produce a proper clamping force, make the two bright and clean, flat end face tightly, to maintain a very thin layer of fluid between the end face seal.

Check the product of several big method when buying a mechanical seal

2014-04-11

As consumers to buy the product will be on the spot to check the quality of the products of this seemingly simple check there is a lot of knowledge, determine the life of the product.Mechanical seal products inspection need more cautious, if check method can also lead to improper product appear all sorts of flaws.The following for the general consumers to accept the stand or fall of how to check the seals.

Diving sewage pump mechanical seal equipment operation

2014-03-10

All kinds of sewage pump mechanical seal device should be checked carefully before running mechanical seal parts number is consistent with the need, each component is damaged, especially the dynamic and static ring any dent, crack, deformation defects such as.If you have questions, need corrections or replace new parts.

Briefly describes the preparing work before mechanical seal

2014-01-23

Check the mechanical seals whether accord with the requirement of design drawings, specifications, all parts (especially the sealing surface, auxiliary seal ring) with and without damage, deformation, cracks and other phenomena, if flawed, and must be replaced or repaired.

Service Guide

Contact Us

Company:Sdms Seal Co.,Ltd.
Add:No.8, Dongsi Road Gaoxin Industrial Zone Zigong, Sichuan，China
Email:sdms1976@sdms.cn
Mobile:0086-18990090044
Tel: 0086-813-5100843
Fax: 0086-813-5100438

SDMSSEAL

In Business Since 1976